|
 |
|
SALT WATER ENGINE FLUSHING
Salt-Away is the first product that is successfully changing the entire salt-water boating maintenance industry.
Because of Salt-Away's popularity, many boaters began to take their engines back to their dealers to have them retrofitted to
be able to accept the Salt-Away Mixing Unit.
Mixing Unit attached to Deluxe Muffs
Now, major boat engine manufacturers are beginning to re-engineer their engines to accommodate the introduction of a salt removing
product without having to use a dispenser.
Salt-Away was the first product marketed as an engine flush, and we developed a successful way to get it into engines.
Its performance is so successful that manufactures of other products claim their products to be the "same as Salt-Away."
There is no other product the same as Salt-Away.
The above head gaskets came out of the same outboard motor. Before he
knew about Salt-Away, Greg Moss, the owner and mechanic of Moss
Marine, Channelview, Texas USA, had always flushed his motors with
fresh water after every use in salt water. The gasket on the left, flushed
with fresh water for a year, was removed during the motor's annual
overhaul. Greg replaced the gasket with the one on the right and began
flushing every time with Salt-Away. It was used in the motor for one year
and was removed at the next annual overhaul.
Salt-Away does 3 major jobs when used as an engine flush.
It flushes out the fresh salt, it protects the inside from rusting and corroding, and it begins to break down salt build-up.
When performing an engine flush with Salt-Away, for outboards, and most I/Os where flushing muffs are used, Salt-Away's
Concentrate and the Salt-Away Mixing Unit are required.
During the process, flush until Salt-Away's foaming action can be seen exiting the exhaust, which takes 20-30 seconds.
Less than 15ml of product has been used, and the remaining product in the Mixing Unit can be used to remove
salt from the boat, trailer and other equipment, up to 10 metres.
SALT-AWAY'S SALT REMOVING AGENT
Use the 472ml Professional Strength Spray while out to sea to remove the salt from your rod, reel, guides
and line as you fish.
Salt-Away's salt removing agent is a new, highly technical product which is much more successful than any other similar
additive on the market.
It has a very high, dense foaming property which allows the salt removal to be unquestionable.
The foaming property is not to be mistaken for a hazardous or toxic material. The foaming soon dissipates.
All ingredients in Salt-Away are non-hazardous, non-toxic and environmentally safe.
For a copy of the Salt-Away Material Safety Data Sheet (MSDS), please contact us.
|
|
|
